1 / 3
STIHL RMA 460 Mower Intermediate Deck Height Notches
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Intermediate Deck Height Notches between positions 2 and 3
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
The STIHL RMA 460 battery mower has a deck height adjustment of between 35mm and 98mm. The lower range notches do not have much adjustability and I found that, for my lawn at least, the standard settings are either too low or too high.
This insert simply slides over the selector plate and effectively adds three additional notches between position 2 and 3.
Two models are included:
- A middle notch
- A one-third notch - which can be flipped over depending on which side you need the notch to be closer to
My Print Settings:
- PETG
- 0.4mm Nozzle
- 200um layers
- 7 Perimeters
- 25% infill
- No supports (some of the bridges are relatively long but I didn't have issues on my printer)
Print in the following orientation for best strength.
