1 / 3
2in Crayford Focuser - 4511F dual speed drive — zdjęcie 1
1 / 3

2in Crayford Focuser - 4511F dual speed drive

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Marcosatm 2" Crayford focuser to fit a dual speed reduction drive

Ocena
0 / 5
Polubienia
3
Pobrania
56
Wydruki
0
Wyświetlenia
431
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Original model and build instructions here: https://marcosatm.com/2020/06/04/2in-crayford-focuser/

This is based on the nut version as I found the heatserts for the bearings difficult to get right.

I've added a lug to secure the reduction drive to the focuser body (requires one M3 heatsert), cutouts for extra space under the lower bearings and buttresses to strengthen the bearings (the rear brace is no longer required).

 

The reduction drive is Type 4511F6M6 from: https://www.mainline-group.com/collections/reduction-drives-classic-6-1/products/4511f-6m6-ball-drive-made-by-jackson-bros-new

 

More info on the drives: https://www.royalsignals.org.uk/jackson_bros_caps/4511.htm

 

The drive is designed for a 6mm rod, I'm still using the 5mm one and need to shim it to maintain concentricity, hopefully 6mm x 0.5mm brass tube will work for this.

The knobs for the drive secure onto the flange and shaft, 2x M2 screws (supplied with the drive) for the larger one and 1x M3 heatsert and grub screw for the slow speed.

Tagi