1 / 1
Willem EPROM Programmer SPI-25xx-PCB5.0T-2025 Tray
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tray to protect the underside of the Programmer PCB and your desk too.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This tray may only be applicable to a single variant of the PCB5.0 so take a look at the picture and make sure what you have is the same. The tray only comes up to the height of the PCB surface avoiding interference with the external connections.
It friction fits well around the sides of the PCB. There are holes for 2mm screws in the corners for more permanent mounting. The centering of the holes is a bit off on my PCB and have left some wiggle room for you in the model.