HP StorageWorks Ultrium 3000 SAS door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HP StorageWorks Ultrium 3000 SAS door
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I scored this LTO5 drive off eBay to do my backups, but it didn't come with the door, and it bothered me. So I measured the dimensions and looked at the original, and after a few tries this worked for me. This model comes with the door, and the retainers on the back so that the door doesn't come out of the supports. The retainers need to be printed in 2 copies, one for each side. You can use super glue, epoxy or Loctite's system for hard to bont plastics to glue it to the back of the front cover (which snaps off easily) and then have the non glued part overhand over the two tips of the door hinge locking them in place (see picture).