FluxLamp - Hackable Soldering Reflow Oven
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The FluxLamp is an open source, hackable soldering reflow oven that can be easily built in small shop.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The FluxLamp is an open source, hackable soldering reflow oven that can be easily built in small shop. It is based on the Vertile PowerCore.
The PowerCore is an Arduino-based device with a variety of interesting features including onboard WiFi, an integrated DC power supply and Phase-Fired control for AC "PWM"
Read the full build guide here: https://nathan.vertile.com/blog/2019/04/24/fluxlamp-the-soldering-reflow-over-for-hackers/
Order the same Halogen Work Lamp for your FluxLamp here.
You'll want to print one high-voltage-cover-symbol.stl to cover the high-voltage AC power portion of the top side of the board and then depending on what you're making either the lamp-mount-centered-nosupport-v3.stl to build a FluxLamp by mounting the PowerCore on the Halogen Work Lamp or the high-voltage-cover-bottom.stl which is a case that encloses the PowerCore, making it (relatively) safe for use on a desk or elsewhere.
Print instructions
Category: Electronics