Anycubic Kobra 3 Max version 1 Poop Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Directly attached poop catcher for the Anycubic Kobra 3 Max
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 1701
- Wydruki
- 4
- Wyświetlenia
- 6005
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently acquired the Anycubic Kobra 3 Max Combo. Unfortunately, there's no collection container for the discarded filament. You can place a container under the purge wiper, but with the force with which the poop is ejected, it's not very helpful. So I designed my own collection container, which is attached directly next to the purge wiper. This way, the discarded filament is transported directly into the collection container. It is mounted to the z-axis at the same time as the purge wiper.
Please note, however, that different screws must be used; M3x10 screws are best.
The lower part has a flap that allows you to empty the collection container.
I suggest setting the infill to 100% for the poop catcher and an infill of 15% for the drawer. The poop catcher does not require a 'support' but you should manually define the recess for the drawer using the 'Paint on support' tool.
