Ketotek Energy Meter Wall-Mount Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert your DIN-mounted Ketotek energy meter into a wall-mount plug-and-play monitor
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Want to monitor the power usage of your 3D printer, workshop tools, or other devices without messing with DIN rails and fuse boxes? This custom enclosure lets you mount a Ketotek energy meter outside the electrical cabinet – directly on any wall – using standard power cables with regular connectors.
Why This Design?
The Ketotek meter is normally meant for DIN rail mounting inside an electrical panel. I’ve redesigned that setup into a compact wall-mountable housing so you can:
Avoid the hassle of DIN installations
Use standard power cables
Easily monitor any device – like your 3D printer – on the fly
Mount it anywhere: workshop, studio, garage, utility room
Features
Clean wall-mount design
Cable slots for zip tie fixation
Secure screw-on assembly
Fits standard 1.6x2.5 mm zip ties
Accepts cables up to 8 mm in diameter
Perfect for portable, semi-permanent or permanent monitoring setups
Hardware Required
6× M3 hex bolts (8 mm or longer)
6× M3 heat-set inserts
4× 3 mm screws for mounting to the wall
4× 1.6x2.5 mm zip ties for cable strain relief
This is a practical solution for anyone who wants energy data without committing to a permanent installation. Simple to print, easy to assemble, and built with real-world use in mind.