Good Grief Card Game Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2-piece insert for the card game Good Grief from Goodie Baggs Games
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A 2-piece insert for the card game Good Grief from Goodie Baggs Games. The tray was designed to fit Sleeve Kings sleeves (60 microns). If you use premium sleeves the insert should still work, though you might have to put some of the ultimate griefdom cards in the deck tray(s). Print 1 of each:
Deck Tray - Separate compartments for the human deck and ghost deck. The annoy o'meter fits horizontally across the tray in the finger cutouts.
Griefdom Tray - The point track(s) fit in an opening beneath the Griefdoms cards on one side of the tray. On the other side of the tray there are slots for all the tokens and die beneath a cutout for the Ultimate Griefdom cards.
Print Details: The below are my print defaults. There's probably a lot of room for saving with less infill and changes to other settings.
- Bambu Lab PLA Matte Dark Blue
- 0.4mm nozzle
- 0.2mm layer height
- Infill 15%
- Infill pattern: Gyroid
- Wall Loops: 3
- Top shell layers: 5
- Bottom shell layers: 3
- No support needed