1 / 4
TS100 TS101 soldering iron tweezers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows you to put two TS10X soldering irons together and use them as tweezers.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
Always was planing to make a something similar but never gotten around to do it. Thankfully Mitxela did it.
I just made small changes.
Drilled holes so you can power the soldering irons with dc jacks. One of my soldering irons is a TS100 so that was a must.
Also made the linking part in line with the front face, so it can be put down on the print bed. That puts the layers “longitudinally” on the connecting part, so it is less likely to break
