CNC Side holding cam lock t-slot system for foxalien cnc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 models to allow you to side clamp stock material on a fox alien (or any compatible cnc) masuter 3s 8040 cnc machine
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is 4 models, one of which is a remix, another is inspired by an existing model and the last part is my own design.
Cam lock top piece (remixed from here)
Cam lock top with hold down rim
T-nut (inspired by)
Railbase - my design
Using a 30mm m5 hex bolt (total length 35mm), a m5 washer and a m5 nut the three models can be combined to create a side locking cam hold down for a cnc system.
its a simple design and the tolorences are within .2mm.
You could scale and change this to fit other slot sizes if needed, this fits the foxalien hybrid rails which are 15mm wide and 8mm deep (3 for the collar, 5 for the T section)
Note: the side holding cams (cam-004) are not suitable for upcut bit use, however cam-005 has a small sloping rim on the cam to hold 18mm thick stock down.