Rack and Sprocket Module 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 265mm long module 3 rack (28 teeth pitch 9.42mm) and the Z15 pinion to move it
- Ocena
- 0 / 5
- Polubienia
- 78
- Pobrania
- 565
- Wydruki
- 0
- Wyświetlenia
- 1721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sprocket with 12mm hole, 15mm tooth width, 30mm total width
Distance between pinion center and rack base 37.5mm
Printed with Flashforge Adventurer 5M Pro rotating stl 45 degrees
Print as oriented
Supports: no
Resolution: 0.2mm
Nozles: 0,4mm
Infil 25%
Filament: PLA
You can find:
Racks Module 3 of various lengths, with or without holes for lateral fixing at the link: https://www.printables.com/model/1284261-racks-m3-various-lengths
Sprockets Module 3 at the link: https://www.printables.com/model/1285394-9-10-12-15-20-teeth-sprockets
Cogwheels Module 3 at the link: https://www.printables.com/model/1285382-cogwheels-40-48-60-teeth
Racks Module 2 at the link: https://www.printables.com/model/1267628-rack-and-sprocket-module-2
Racks Module 3 of various lengths, with or without holes for lateral fixing at the link: https://www.printables.com/model/1284261-racks-m3-various-lengths
If you download/enjoyed this file, please leave a like 
- Thanks