Elegoo Centauri Carbon Z axis bearing cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elegoo Centauri Carbon Z axis bearing cover protects the Z axis lower bearings from dust, bits of filament.
- Ocena
- 4,955 / 5
- Polubienia
- 569
- Pobrania
- 2171
- Wydruki
- 19
- Wyświetlenia
- 9578
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
!!! Important !!!: Be careful if you take the bed to the bottom as the bed will skip teeth in the belt because the bed hits the bearing covers.
If you want to use this mod you have to change the Printable height parameter in the slicer to 250mm!
Inspiration comes from Piotr_C, who makes this for Bambu machines, but that is not good for Centauri. So I make a new one from Sketch, which fits perfectly with the CC.
There are different versions with different tolerances. Use what is perfectly fits. With my CC there is no need for tolerance.
I highly recommend to print them with 0.12mm layer height.