Reach 3d alternate hot end carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a new hot end design for the Reach3d printer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a new hot end design for the Reach3d printer. It allows for changing parts and not having to completely disassemble the hot end carriage when you want to change things. I also tried to keep it as small as possible so that you can have part cooling and bl touch without losing any print area.
The hot end fan in the pictures was not designed by me and can be found here:
http://www.thingiverse.com/thing:719427
The dragon fan duct was not designed by me and can be found here:
http://www.thingiverse.com/thing:26310
I will most likely be changing the part cooling fan mount to work with a radial fan once my fan finally arrives.
Probe offset should be set to x:-30 for bl touch and -40 for prox sensor.
Print instructions
Category: 3D Printer Parts