Waterrower third wheel for easier moving
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for installation of a third wheel to allow the Waterrower to be moved easily when in the upright position.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Stirdy PLA bracket to install a castor on the Waterrower, without modifying the Waterrower - it is therefore fully reversible.
The design fits a caster wheel which is 37mm in total height and has a hole pattern of 36x22mm (which is what was available in the local hardware store, sorry). The caster is attached with M5x5 bolts, with the M5 threads modeled into the part.
For increased strength ensure sufficient number of perimeters and optimal print orientation to keep the main load path in-plane with the printing layers.