Coral frag holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
magnetic frag rack a single a triple and a 5 frag version.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The frag rack comes in 3 versions a single frag holder a triple and a 5 frag plug holder. The star piece is done in tpu so it will grip the frag plug. The rest of the parts were done in pla+. You will need to print 2 magnet A's and glue a magnet into each. Then glue one into the holder and print a magnet B to encase the other magnet that is glued into magnet A you printed. You will print 2 of the holders with holes one in black and other in whatever color that you want to pop. Then glue the 2 holders and a star piece together sandwiching the star in between the 2. Then glue the sandwich into a holder. Pay attention to the sandwich because the holes are just slightly off unless glued exactly as they come off the printer. I used 32x3mm magnets from Amazon.