VEX License Plate Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Basic VEX License Plate Holder - Based off of previously uploaded Thingiverse files.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Basic VEX VRC License Plate Holder. The Tab Version was originally designed for holding plates into place. The non-tabbed version also works well. If you need plates to really stay in place, you can also just wrap a rubber band around it too. Plates during testing did work upside down, but the hold degraded over use. Printed with supports, 0.2mm layer heights, on a X1C, and 0.16mm layer heights on an Ultimaker 2+.
PLA and PETG both work well.
Feel free to reach out with any questions or issues that come up, and I'll see if I can fix them.
Originally Designed for the 2022-23 VEX Spin up Season