ChainSawMan_Makima
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Project: Makima.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu Yellow Transmission Distance: 6
PLA 3DHoJor Blue Grey Transmission Distance: 2.4
PLA Sunlu Cyan Transmission Distance: 0.1
This print uses 6 unique filaments, other brands of filaments with similar TD should work as well
Swap Instructions:
Start with Black (Slot1)
At layer #7 (0.64mm) swap to White (Slot2)
At layer #8 (0.72mm) swap to Red (Slot3)
At layer #11 (0.96mm) swap to White (Slot2)
Pause at layer 13 to allow color swap for slot1 and 3
Slot1: Black --> Blue Grey
Slot3: Red --> Cyan
At layer #14 (1.2mm) swap to Yellow (Slot4)
At layer #15 (1.28mm) swap to Blue Grey (Slot1)
At layer #16 (1.36mm) swap to White (Slot2)
At layer #21 (1.76mm) swap to Cyan (Slot3)
At layer #22 (1.84mm) swap to White (Slot2) for the rest.