1 / 5
Artillery X4 Pro - Filament spool holder on bearings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Artillery X4 Pro - Filament spool holder on bearings
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 450
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
My remix of the Creality (Ender 3) Filament holder 80mm spools for the Artillery X4 Pro.
There's 2 versions of the "X4 spool holder" part: right and left, depending on what side you want hanging your spool.
Mine on the photos is the "right" one.
Use bearing 608ZZ sizing 8 X 22 X 7 mm
Print settings used:
- layers: 0.2
- infill: 40%
- infill type: cubic
- supports: organic tree
- orientation:
