Safety Razor Blades Disposal box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple box that should fit more than enough blades to forget about it for years. Made for blades to go in, not out.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this disposal box to get rid of razor blades in a safe way. The box itself is extremely simple, and can accommodate probably a year or two of blades depending on usage.
The slot is made so that blades need to slightly bend in order to get in, so there is virtually no chance of them coming out by accident. See the fifth picture for the internal structure
Since the print is completely enclosed, it does require some bridging, but I had great results printing it vertically, with the slot at the bottom, like in the third and fourth pictures. I used supports on build plate only to get a good finish on the outside.
I also purposefully left the sides blank on the original STL so that anything can be written, but I included the SVG I used to recess into my own box.