Widemouth barrel lid incl module adapter for hydroponics / Weithalsfass Deckel mit Adapter für hydroponics
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid for square barrel for hydroponics tower
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried hydroponics last year and failed miserably :D This year I give it a second try. I bought one of those widemouth barrels as a base for the tower. There is already one lid available here for those barrels, but the one I bought has a wider opening. So I designed my own.
Not much to say to it. If you have a square widemouth barrel you probably need this. Fits as good/ bad (has a lot of play) as the original but serves as a stable base for your tower. Please measure before you print, there is also a smaller version already available here on printables. This one here which I designed is 23.6cm on the outside and the barrel itself has an opening diameter of about 19cm.
Printed mine in PETG without any supports lying upside down on the build plate. I used 15% infill and 4 walls. For hydroponics I would personally avoid ASA since it could potentially emit harmful chemicals into your food.