1 / 7
K1 Extruder HGX Gears — zdjęcie 1
1 / 7

K1 Extruder HGX Gears

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Extruder for Creality K1 printer, based on HGX Gears

Ocena
0 / 5
Polubienia
29
Pobrania
82
Wydruki
0
Wyświetlenia
994
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Consider this a WIP despite having using this extruder for about a month with great and reliable performance. Build documentation will come along the way.

To fit this extruder material has to be removed from the carriage. As shown on this picture (red part must be trimmed):

 

Consistently reaching volumetric flow of about 30mm3/s on generic ABS and 16mm3/s on some HT-PETG. 
No heatcreep issues.
Extruder arm travel is minimum, just enough to properly load and unload the filament with the minimum space available.

For building this extruder you need a complete HGX gear set and one M3X3mm metal insert for the extruder arm screw.

Tagi