1 / 3
Worx WA3551.1 Battery holder for HoneyCombWall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
That is my WA3551.1 battery holder made for the honeycomb storage wall from RostaP.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder for the WA3551.1 battery made for the honeycomb storage wall.
Press the button of the battery for put in and take out.
Made in PETG. But you can use PLA.
My print settings:
- 0.24 mm
- 4 walls
- 20% infill
- Support: On build plate