1 / 4
BMW Motorrad Motorcycle Rear Wheel Balancing Insert R1200 — zdjęcie 1
1 / 4

BMW Motorrad Motorcycle Rear Wheel Balancing Insert R1200

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is for a R1200GS. It works with a 13mm rod. It probably works with other years and styles of wheels.

Ocena
0 / 5
Polubienia
3
Pobrania
70
Wydruki
0
Wyświetlenia
329
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I have a 13mm rod that I utilize to balance regular motorcycle wheels. The hub mount BMW R1200 rear wheel has a 62mm opening. That's far too large for my basic setup.

I made this part to seat into the opening of the hub, with a huge nut to keep it in place.

I printed it out of PLA. It's working great.

It has more thread than needed, but I wanted a long section to slide onto the rod.