Wood Wick Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamps for wooden wicks for candlemaking
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- BSD License
!! Use at your own risk!! Plastic is flammable and these will likely catch fire if the candle wick burns down to them. You may or may not care. Regardless, please be careful when using these.
-----------------
Wick holders have a 0.75mm gap. To ensure better bed adhesion I printed the first 3 layers slow, not sure if this made a difference.
The non quad wick can be printed sideways with no supports for better structural integrity (layers will be perpendicular to shear forces when inserting wicks), but they seem pretty indestructible printed standing up anyway.
I haven't tested sideways printing of the quad holder but supports will most likely be necessary.
The quad holder is intended to hold wicks sideways for wide but shallow/short candles, ensuring the wax burns a little more evenly.
-------------------
I've included an .scad for the simpler holder in case you want to play around with the sizes.