XBOX 360 SLIM LITEON DG16D4S - 5S REPLACEMENT DRIVE COVER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Including V11, V12, V13 Models.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 870
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Replacement DVD Drive Top Cover with the cut file for plexiglass. All of the print settings are in the Read Me file within the download!
FITMENT:
Lite-on DG16D4S, Lite-on DG16D5S ONLY.
INSTALLATION:
1st: Print it and remove all supports.
2nd: you must remove the magnet from your old DVD Drive cover and pop it into your new cover. You can Simply remove the yellow sticker and use hot air to heat up the silver Circle and then pop it out.
3rd: you must hot glue the front top nubs and the sides just a tiny bit and also glue all for feet down to the bottom tray of the drive.
4th: heat up the glue on the feet of that frame with hot air and then press down to make sure everything is seated correctly. If you don’t align this correctly you may have alignment issues and not being able to install your faceplate.
5th: once you are 100% that everything is seated together nicely you can install the vibration damper band on Rear of the drive and install your drive to your console!
This is Designed by SharkysCustoms.com. Please do not share without Giving Credit. Thanks so much!