Zelda_Mipha
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Zelda warrior, Mipha is coming up! let me know if you like it, I'll try to make the other 2 soon!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Project: Mipha.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 169x240mm in size, this is the original size of the poster. However, i added a negative frame to make a hexagonal shape, if you dont like it, just delete the frame in the “Object” before you print.
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA 3DHoJor Black Transmission Distance: 0.1
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu White Transmission Distance: 5.9
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu Misletoe Green Transmission Distance: 4
PLA Sunlu Cyan Transmission Distance: 0.1
PLA 3DHoJor Blue Grey Transmission Distance: 2.4
This print uses 7 unique filaments, other brands of filaments with similar TD should work as well.
Swap Instructions:(for 1 AMS)
Start with Black (Slot1)
At layer #6 (0.56mm) swap to Red (Slot2)
At layer #10 (0.88mm) swap to White (Slot3)
Pause at layer 12 to allow color swap for Slot1 and 2
Slot1: Black --> Misletoe Green
Slot2: Red --> Cyan
At layer #13 (1.12mm) swap to Yellow (Slot4)
At layer #14 (1.2mm) swap to Misletoe Green (Slot1)
At layer #16 (1.36mm) swap to Cyan (Slot2)
At layer #17 (1.44mm) swap to White (Slot3)
Pause at layer 20 to allow color swap for Slot4
Slot4: Yellow --> Blue Grey
At layer #21 (1.76mm) swap to Blue Grey (Slot4) for the rest.