Ring Light Riser Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increase maximum height of a ring light stand to clear the top of external monitors.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Purpose is to make ring light stand tall enough for both the light and the web cam to clear the top of external monitors.
Made for this ring light on Amazon (https://www.amazon.com/dp/B086GX8P2Q?th=1). Base diameter of ring light is 150mm (~5.9 inches). Increases maximum height by 5 inches (127 mm).
Model has 2 pieces. The smaller piece is a rim with small pegs to fit into holes on the base part. This rim helps to secure the ring light stand on the riser and enable everything to print without supports.
Print both parts upside down. Alignment pegs on rim are delicate and may need to be cleaned up before inserting into the corresponding holes on the base. Recommend a fine detail print setting for the rim.