Smartdrive MX2+ charger wall mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple charger wall mount for the Smartdrive MX2+ charger.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple wall mount for the SmartDrive MX2+ charger.
The print contains two main parts: the mount itself, and a plug holder that slides into a T-slot on the side of the mount.
Installation Instructions:
Print the parts using your preferred settings. PLA or PETG is recommended for durability.
Mount the charger holder to the wall using either countersunk screws or Command adhesive strips, depending on your surface and preference. The back of the mount includes holes for screws and a flat surface for adhesive mounting.
Slide the plug holder into the T-slot on the side of the main mount until it fits snugly.
Insert the charger into the mount, and secure the plug in the holder when not in use.
This setup keeps your charger organized and easily accessible, whether mounted with hardware or damage-free adhesive strips.