Hypertherm Torch Laser Adapter

I found a unique idea on my plasma forum and decided it wasnt good enough for my laziness. So I redrew it and printed to take the bore laser of my choosing and also a switch for the bore laser is absolutely needed. 

All the holes for the bore laser are 0.010 over the dimensions by caliper. I bought the .223 caliber (longer) thinking it was better but not necessarily. If I was going to buy another it would be the same brand, with switch, and the 9mm laser bore. No real reason other than length, but the .223 is long and easier to handle maybe. 

Coincidentally the switch activates when you push it onto the torch and another push turns it off but you can always turn the laser on and off by just pushing the button inside the adapter.

This whole redesign was so I didnt have to mess with unscrewing battery caps and potentially leaving the laser on. Again the switch is imperative here. 

The latest version has a 2" body length but you can cut that down in slicer if you wish. I prefer the longer body as it sits more stable on the torch tip. If you had the 9mm ver you could easily cut down the body. 

Laser: https://www.amazon.com/dp/B0CMZY4CM7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1