Lepidoptery Board Game from New Mill Industries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print allows you to play Lepidoptery with a Connect 4 style board, but each column can be dropped individually.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Learn about this excellent game at https://www.newmillindustries.com/store/p/lepidoptery-preorder
Lepidoptery uses a Connect 4 style board, but the problem with Connect 4 boards in reality is that they drop all the columns at once. This print allows you to drop one column at a time. I also have the available combinations at the top, as well as two places for the players to put their pegs should they choose to pass for the turn. I would not recommend printing the board or base in dark colors as they don't show up super well. (See my excellent photos, haha)
Lepidoptery is designed by David Karesh and Srinivas Vasudevan and published by New Mill Industries.
Print Instructions:
1x of Board and Base
5x of Slot
2x of Player Flag (one in each color)
34x of Player Discs (17 in each color; ideally matching flag colors)
All of these models are pretty generous on their tolerances. I was lazy and didn't want to pick supports off the board, but you should probably. The base can be printed however you like, but the orientation it's in is how I printed it, and just used regular supports. Everything else may need to be rotated to the way that prints best for your printer. As you'd expect; smaller layer heights equal nicer looking prints, but the print functions fine if you print it fast too. .2 works fine for everything.