Rubber Band Gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nine-piece 3d printed rubberband gun.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 754
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
I designed this 9-piece 6-shooter rubberband pistol. I recommend printing the sides of the gun by themselves. I printed the pins, holder, wheel, and trigger at the same time in basic red PLA. This was printed on an Ender 3 Max Neo. If you look at the first photo, you can see I wrapped the center in a rubber band. It is not required, but it is recommended for extra stability. I made the gun big on purpose because I have big hands, but it is scalable if you have a smaller printer or smaller hands. This is one of my first designs, and I would appreciate it if you could tell me what I can improve, what I can do better, and any general thoughts. Thank you!
Pieces
1 Right side
1 Left side
1 trigger
1 wheel
1 holder
4 pins
As many rubber bands as you want.