Prophecy Top Prime (needs slicing)

so i bought a Worker Prophecy to mod up with parts, and the main blaster didn't have a top prime. And they didn't' sell a top prime, just kits to make it a pump or a bolt action (with extra parts to buy!)

So i just made one.

It has nails that fit into the side; you can see the nail head in the pics, but you can take them off when you superglue it in. It does a good job supporting the prime… for now.

EDIT: the nail i used is about 2.5mm thick. The hole is 2.8mm, and a little tight, but will wiggle in for supergluing.

I tried to export the sliced models from Bambu Labs, but it wouldn't work. So i will include the whole piece so you can slice it yourself and add your own connectors. I sliced mine down the middle and put three 4mm circle connectors. This should help take off strain from just two points to 5. 

the hardware i used is a brass spacer and some screws. 

• Screws: M3 x 12mm button head socket cap screws, thread length: 12mm, thread pitch: 0.5mm, thread diameter: 3mm. https://www.amazon.com/dp/B0CGTR8VYZ 
• Spacer: M3x20 Female Thread Hexagonal Hex Brass Pillar Standoff Spacer. https://www.amazon.com/dp/B07WQTF9X9
• Two wood nails, 2.5mm diameter

Used two spacers and 4 screws. 

VERY basic design; it works (so far). Printed in PLA, but if you want more strength or to use it outside in the sun, print it in something more studry.

I also included the Bambu Labs A1 file with the slice and i also added some modifier spaces to print some solid support structure for the pin/nail. 

Go hog wild on it. change it up, make it look cool. Let me know if you do; maybe i'll like yours more than mine.