Chess Piece Weighting Fixture/Jig for Dubrovnik 3.86" (and many other) Chess Sets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rack that holds a set of chess pieces upside down for weights to be inserted, or while glue dries, etc.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is just a set of appropriately sized tubes, connected by stabilizing bars so they don't fall over. It holds one side's pieces at a time, upside down so you can fill them or add weights. This is sized for the beautiful Dubrovnik [Kingsize 3.86"] set here on printables. But should work for many others (especially smaller) sets.
OPTIONS FOR WEIGHTING HOLLOW CHESS PIECES:
A very simple and effective option is to use steel BBs with basic school (or bulk cyanoacrylate) glue. If the glue is at all thick (like Elmer's), you'll want to let a few BBs in at a time before adding a drop. Or otherwise make sure the glue doesn't stop the BBs from settling.
For sand or BBs, little scoops like these can be useful.
Another option is the same as above, but using sand (or anything heavy and small) instead of BBs. Or, one could use Epoxy as the glue for a smoother and more predictable finish.
If you try something that works well, please post a “Make” here. I'd love to see what people come up with.
SUPPORTING YOUR FAVORITE DESIGNERS:
The Amazon links below are affiliate links, and it costs you nothing to use them. If you use an affiliate link to get to Amazon the next time you need to buy something, the designer associated with that link will get a small percentage of any sale made during that browsing session. I hope you'll pick a designer here once in a while to support in this way. Frankly, it tends to be more symbolic than anything, but it lets designers know that you connected with their designs, and it feels good.
BOM:
- Filament:
- PLA+: https://amzn.to/3CEHMk0
- Weights:
- Inexpensive Bulk BBs: https://amzn.to/4jRzbKT
- Steel Chips: https://amzn.to/44yosQX
- Glue Options (prices vary, so check multiple):
- Titebond 5064: https://amzn.to/4juquWY
- Elmer's: https://amzn.to/444EAJT
- Casting / Pouring Epoxy: https://amzn.to/42BWiSz
- Felt: https://amzn.to/4jkd9As
INSTRUCTIONS:
- Print this… Very little strength is needed. Unless you are manufacturing loads of sets, a prototyping (i.e. fast, low infill) profile is probably sufficient.
- Drop in your chess pieces, upside down.
- Fill or weight them as you like. Filling until flat on the bottom and adding felt is a great option.
- Let all the glue dry, then remove and repeat with the other color pieces.
- ‘Likes’, ‘Follows’ and ‘Downloads’ all help to elevate goods designs, like any other social media. If you like a thing, please click ‘like’.