Shiner Swimbait (Fishing Lure)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
About 5cm long swimbait, based on the species known as the shiner.
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 375
- Wydruki
- 0
- Wyświetlenia
- 1671
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is lure is based on the striped shiner, these fish can be found in Central North America (From Ontario to Louisiana). The model is fairly scalable, if you decide to scale it up, I would only recommend going up to 300% and no further but it’s your choice. Place on the flat face so that you don't need supports for 3 out of the 4 models. For the model with the cylindrical protrusions just rotate it 90 degrees and use custom supports to smartfill only the 2 flat faces closest to the bed. The one part does have a through wire and the other is needs a twist wire or screw eye. The Fins are printed with TPU filament to present a more realistic look to this swimbait. If printing with a filament printer please scale up to at least 160%. If using a resin printer feel free to use the 100%. Spent a little while modelling this one so hope you enjoy!
Print settings;
-Layer Height: 0.1mm (Print the smallest layer height possible on your printer)
-Custom Supports: Yes (I used organic)
-Perimeters: 2-3
-Infill 70%