Big Disposable Glove Box - Ikea Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy box, with an magnetic lid, for an Ikea Skadis board that holds around 200 disposable gloves
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I use a lot of nitrile gloves while handling resin for 3D printing. The gloves comes in different size boxes depending over where I order from, so the simpler box holders for Skadis wasn't an option. So I designed a box that can hold them on my Skadis pegboard.
The box is very sturdy and holds around 200 gloves at a time with a large hole for getting gloves out.
The box and lid has holes for 6mm magnets if desired.
Print the box standing with snug supports.
Print the lid with the holes facing upwards. No supports needed.
The box uses the Skadis T-Clip System. So you need to print 3 of the T-Clips found here: https://www.printables.com/model/256896-skadis-t-clip-system