1 / 3
BABYMETAL Stand - New Logo - Multi Color Print Friendly - Detached Wings — zdjęcie 1
1 / 3

BABYMETAL Stand - New Logo - Multi Color Print Friendly - Detached Wings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified original to make the wings a separate print from the center to allow easy multi-color printing

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I modified the original model for the new Babymetal logo to allow the wings to be printed separately and then glued onto the center. This lets you print the center and add a pause in your slicer to change filament color so the words are a different color than the base. Likewise, by printing the wings separately you can add a pause and change filament, then glue the wings into the pre-made slots. I made this to print a lot to hand out at a concert and added words on the stand and the image/words on the back - those are not on the STLs so you can print blank or add your own.

Thank you to the original poster!

Praise the Fox God!

Tagi