BTT SFS filament sensor Blank Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I changed filament sensors, but liked the way my filament inlet was held, so i cooked this up.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is just a quick easy model to help hold the end of the bowden tube. After changing to a toolhead sensor, and trying it out with a floppy hose in place of the old sensor, i decided to do this.
I was going to cut some holes in it and make it look cool, but i put a dancing banana on it instead.
You need four heat inserts and four 3mmx10's.
If i thought it would have been good on the first try, i probably wouldn't have made it gray.
Enjoy!
also, the banana makes it a kinda big model.. so there's an stl also.