Parametric Dyson Handheld Vacuum Extension (Dyson V11)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slide on extension for the narrow tip of Dyson V series vacuums, tested on a Dyson V11 but i think it should fit more.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I made this for a Dyson V11, but i would imagine it would fit other handheld vacuums of theirs. I did try it on one of their floor vacuums that we also have and it did not fit but was close. The vacuum attachment this was designed to fit was 34mm x 16.7mm, I left 0.1mm clearance on all sides which provided a snug slide on fit but is fairly tight.
Print upright, I would recommend with a large brim to stabilize. You may also want supports to help stabilize depending on the length/height you elect to print. I printed in PETG but I would imagine PLA could work as well.
I included STEP and STL for 200, 100, and 50mm lengths (Pictured is 200mm). This length refers to the added length - the overall printed height will be this measurement + 50mm. These should also be stackable, since the final dimensions should match the stock attachment - so, if you are unable to print the size you need you could print multiple shorter ones.
There is a public OnShape document here that allows modification of the length and clearance easily via variables.