Chessex Mega-Hedral Dice Chest: Print-in-Place Hinges and Threads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dice storage sized specifically for Chessex Mega-Hedral sets. Prints in place with no supports.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is v6 of my print-in-place DnD dice storage box, sized specifically for Chessex Mega-Hedral dice.
The design stores a standard set of seven dice, again specifically these sets: https://www.chessex.com/mega-hedral-dice-sets
Features a print-in-place living hinge and threaded nut for closure. Designed in Solidworks, tested over many prints on a Bambu P1S.
The sigil on the top of this dice chest represents my group's (at time of posting) five year old homebrew DnD world of Ascension. If you don't like it, feel free to remove it! If you don't know how to edit models—enjoy it.
Print Instructions
- No supports needed
- 2 walls with a 0.4mm nozzle is fine, 3 is more robust.
- The nut is already scaled up for clearance. I recommend printing the model as-is, but you may need to play with scaling to get a smooth mate with the threaded boss on the box.
- DnD dice vary in size-- you may need to scale the box size up or down to securely hold your dice without rattling (if so, don't forget about scaling the nut equally!). However, these Mega-Hedral dice sets are pretty wonky with their relative size, I'm not sure this will fit normal dice if scaled down.
- Extreme scaling down or up could result in the print binding or being overly loose.