1 / 7
Telrad Dust Cover | print in place, clip-on — zdjęcie 1
1 / 7

Telrad Dust Cover | print in place, clip-on

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Foldable cover for Telrad finder scope.

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Foldable cover for Telrad finder scope. Print with both hinges touching the build plate (as shown in the pictures). This orientation ensures the filament runs lengthwise along the thinnest parts so they are less likely to break. Straight supports everywhere. I haven't tried with tree supports but it probably wont work out well. You should also slow down the print speed; my printer mostly just made spaghetti at anything over 40%. 
The tolerances on the hinges are a bit loose and they could honestly use a redesign. But I made this a while ago and I couldn't be bothered going back to fix it. You could put some blutack or something in there if you want a tighter fit.

Tagi