Shin Godzilla
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is from a scan of a Shin Godzilla figurine
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 898
- Wydruki
- 0
- Wyświetlenia
- 4084
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The profile is for printing at .16mm layer height. I had done .20 but the right claw kept failing for some reason. I also have the infill at 40% just to try to ensure taking off supports on the claws won't ruin them. You can get away with a lower infill but do so at your own risk. Shin Godzilla is one of the coolest-looking Godzillas and I was happy to turn this into a printable model. It was scanned from a figure by Laser Design on Sketchfab and they have been properly credited. I love Godzilla models, and this one is unique and I am happy to share it with everyone and make it a physical model we can all enjoy! I hope you print it and enjoy it!