SRAM Pod Ultimate Caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The SRAM Pod Ultimate Caps, clip on replacements
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 424
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The SRAM Pod Ultimate clip on Caps come off very easy and they are next to impossible to buy replacements. I lost one, could not buy the clip on version and so designed these.
Tested printing in PETG (The clips on the back brock easily) and 730D TPU (The came out ok, but with being small the print quality was not good). I have also printed and tested Prusament PC Blend and this works and looks great.
They clip on well and stay in place, however as per the original SRAM versions I have secured them with a small piece of 3M automotive super tape.
I have provided the .emf project, but if importing the .stl, then you will need to duplicate the model and then mirror it along the Y axis.