1 / 4
BMW K1600 dashboard RAM mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Based on the design of Harryjames' Quad Lock mounting plate for K1600, I've tweaked the design to make it stronger for use with heavier devices like tablets. Requires an M8 socket head cap screw with approx 35-40mm of thread, an extra large (mudguard) M8 washer and an M8 nut to provide a solid core for the 1" ball and shaft, and 3x 6G self-tapping screws (~3-4mm, at least 12-15mm long).
Print from a high-strength filament such as ASA, and with high wall count (I used 13 walls to ensure the ball was solid) and at least 40% infill (preferably gyroid infill)