Model airplane can be launched with rubber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model airplane can be launched with rubber
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Model Description: Rubber Band-Powered Glider (STL Model)
This is a simple 3D-printed glider model designed for basic aerodynamic experimentation and indoor/outdoor fun. The model is powered using a rubber band and launched by hand. It consists of:
Fuselage (main body)
Main wing
Tail wing
Tail fin (rudder)
Assembly Instructions:
Glue the parts together using a fast-acting adhesive (e.g., cyanoacrylate or super glue). Apply glue where the wings and tail connect to the fuselage. Ensure everything is aligned properly.
Attach a small metal piece to the nose (front tip of the fuselage). This helps with balance and flight stability. You can do this by heating a short piece of metal (such as a nail or screw) and carefully inserting it into the front end.
Loop the rubber band through the hole in the tail section as shown in the reference image. Use this band to provide launch tension.