Ultimate modular all-in-one camping chair beer/wineglass/cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adjustable holder for cups,beer/wineglasses - can be adapted to different chairs through a modular hirthjoint-design
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 1779
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Changelog
- 2025-05-02 added carado_2mm_hirthconnector_v2.stl
- 2025-05-12 added beerholder_v8_84mm left and right
- 2025-05-21 added separate connector for the Isabella Camping Chair
Intro
I designed my own beer/wineglass-holder because i couldn't find one for my camping chairs. After countless tests i finally invented the right modular design ;)
Usage
The holder is usable (means you can put a beer in it), when you connect the holder to the hirthjoint-connecter ;)
There is a snap-pin-socket in the hirthjoin-part and snap-pin in the holder-part, which guarantees that the parts don't separate too easily. You need some force (not much) to connect it.
The hirthjoin is in 10 degree-steps, so you can adjust the angle of the holder.
Beer/wine/coffee holder
I've designed that way, so it fits for wine glasses, too. Thats why there is the cutout on the ground.
included are
- 80mm-version
- 84mm-version for bigger coffee-cups
hirth joints for following are included
- relax chair from Bo-Camp https://bo-camp.com/en/industrial-collection-relax-chair-molfat-cationic
- campingchair from Dukdalf https://www.campingplus.de/camping-freizeit-outdoor/campingmoebel/campingstuehle/dukdalf-stuehle/dukdalf-stuhl-cha-cha-farbe-0649-silber-anthrazit
- 2mm connector for storage boards in RVs
- OpenScad-File (needs BOSL2) for own designs.
Printing
Both parts need support - the region isn't visible anyway, when you connect them. So it's okay.
Be careful when you are removing the support from the snap-pin-part
Place the hirthconector like in the screenshot i have attached.
I've used 15-25% Gyroid infill and minimal 3 perimeters.
It works fine with a layer height from 0.2mm to 0.28mm (Prusa MK4s HF)
Happy camping/drinking ;)