Kato Unitrack Insulated Unijoiner Alternative - N/HO Scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print this insulated Unijoiner as an alternative to Kato’s 24-816/24-819 for seamless electrical isolation in Unitrack.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 327
- Wydruki
- 2
- Wyświetlenia
- 891
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When in need of a Kato Unitrack Insulated Unijoiner, this 3D-printable solution is ready to click into place. Designed as an alternative to Kato’s 24-816 or 24-819 insulated rail joiners, it provides reliable electrical isolation for N Scale (1:160) and HO Scale (1:87) track configurations. Whether you’re fine-tuning your model railroad or customizing your layout, this printable piece offers a seamless DIY option. Just print, snap, and keep your trains running smoothly!
Print Settings:
- Nozzle: 0.4mm
- First Layer: 0.2mm
- Layer height: 0.1mm
Optional (but helpful)
- Wall generator: Arachne
- Works fine with PLA, but PETG might be better if you take your track apart frequently.
No supports or brim needed
[1-87, 1-160 scale]
