Rack mount brackets for D-Link DGS-1210-10P (278mm wide version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable rack mount ears for some versions of D-Link DGS-1210-10P (278mm wide version)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
This is a pair of ears to rack mount certain versions of D-Link DGS-1210-10P PoE switch. I have several of these switches. Some versions are wider than others. These fit the 278mm-wide version with eight RJ-45 jacks and a pair of SFP jacks.
I printed a set to verify fit. I changed the model a little bit after that to make them easier to fit onto the switch. You will need a pretty long screwdriver because the counterbores on the side are pretty deep. You will also need some M3 socket head or button head machine screws. I recommend a screw length of about 8mm.
Some of my DGS-1210-10P have ten RJ-45 ports. These will NOT fit that model.