Articulated arm - Ph/EC meter holder -Autopot bucket clip mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed, made a custom bucket mount, as well as pH/EC meter holder.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
Articulted arm clip for holding onto bucket. needs supports.(prints well with holes parallel to the bed.)
Clip latch - rectangular part, slides into the clip to secure to the bucket, can print with no supports if you place it with the slider part going up, with the short side on the top.
EC/PH holder meter, will need supports for the circles, recommending printing up right.
Strongly recommend using metal nuts and bolts, preferably using a wing nut, as the plastic ones arent very strong.
STL as well as solidwork file included
The rest of the parts can be found on the original model this was remixed from: https://www.printables.com/model/37231-mechanically-articulated-arm