1 / 8
Core One/+ _  _ _ cover PSU, print No MMU — zdjęcie 1
1 / 8

Core One/+ _ _ _ cover PSU, print No MMU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

"The cover conceals the screw holes of the original cover and adds a colorful Prusa inscription." Print without mmu unit

Ocena
5 / 5
Polubienia
19
Pobrania
38
Wydruki
2
Wyświetlenia
389
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

"The cover conceals the screw holes of the original enclosure and adds a colorful 'Prusa' inscription. Printed for simplicity without MMU and assembled using super glue. The cover is held in place by pins."

"The original cover remains in place; you simply overlay it with this cover. The model is not a complete replacement cover."

"It would also be possible to modify the original cover to a colored version, but my priority was to cover the screw holes and fully utilize the original cover."

"I chose the variant with fully cut-out 'Prusa' letters for more precise alignment."

"The test prints had inconsistent bridges, and sometimes the letters didn't align precisely."

"Assembly is more laborious, but the result is 100% alignment."

 

 

 

Print PETG

0,2mm structural

0,4n

default profile only slightly changed see 3mf

 

 

Print PETG

0,2mm structural

0,4n

3 perimeters

perimeters at a height of 1.4mm set to 7 see 3mf

default profile only slightly changed see 3mf

 

 

Assembly

 

"For the assembly, I used super glue and paper tape. The tape is not mandatory, but it simplifies the assembly and can remain afterwards."

 

 

 

 

"Apply the glue as much as possible to the edges of the model; only a small amount is needed to prevent the glue from getting onto the surface."

 

"For alignment, the letter can be pressed from the back against a firm surface; caution is needed here to ensure that excess glue does not seep onto the surface."

 

 

final result

 

"Do not confuse the inner fillings of the letters 'P' and 'R', and pay attention to their orientation on the visible side."

"The inner fillings of these letters can be inserted before placing them into the cover."

Tagi