Snowman Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mold for Snowman 7" [177mm] tall. The walls are thick enough to allow you to scale the mold down to 25% if you want.
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 205
- Wydruki
- 3
- Wyświetlenia
- 3050
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Greet the snow with joy. Make a mini snowman or dozens of them. Print this twice to make the perfect snowman then decorate him up.
The mold makes a 7.00" [177mm] tall snowman. You can scale it (Version1) down if you want smaller men. Have fun with it. Can't wait to see how you dress them up.
Tip: Compress and make the snowman then rotate the mold 90 degrees and repress it to remove out the flash and smooth the sides.
Update: I revised the model by incorporating a few field-test suggestions. I added ejector pins to assist mold separation. Normally, I would never make Version 1 still available to you because it's obsolete and why would you want that? Well, Version 1 is scalable, meaning you can print it at 25% size if you wanted and everything would still work the same. That's not true with Version 2 because all the internal clearances would be off and the part would not operate properly. So if you want to shrink it, use Ver 1. Otherwise, print Version 2.